| Title |
Equivalent Circuit Model for Four Port Connector System |
| Authors |
심민규(Shim, Min-Kyu) ; 김종민(Kim, Jong-Min) ; 나완수(Nah, Wan-Soo) |
| Keywords |
S parameter ; Equivalent circuit parameter ; Conversion algorithm ; TDR ; IFFT |
| Abstract |
This paper describes an equivalent circuit modeling of 4-port connector system. A coupled transmission line was designed and fabricated, mimicking a 4-port connector system, and then S-parameters were measured using 4 port VNA (Vector Network Analyzer). The S-parameters from measurement and from Full-wave simulator coincided quite nice. By using these S parameters, an equivalent circuit parameters for a 4-port system was obtained. The time domain response from the equivalent circuit model matched to the signals, which was measured using TDR(Time Domain Reflectometry) meter. We were also convinced that there should be enough bandwidth to get a meaningful time domain result from Fourier inverse transformation of the S parameters. In addition, we applied the conversion algorithm to the 4-port connector system, which calculates the S-parameters of a 4 port system using the data from a 2-port VNA with the other ports open. Comparison of the two data, one from measurement and the other one from the conversion algorithm, was made in this manuscript. |