| Title |
Comparison of UV images and Measurement of the Corona Discharge from Insulators using the UV Sensor |
| Authors |
김영석(Kim, Young-Seok) ; 최명일(Choi, Myeong-Il) ; 김종민(Kim, Chong-Min) ; 방선배(Bang, Sun-Bae) ; 송길목(Shong, Kil-Mok) |
| DOI |
https://doi.org/10.5370/KIEE.2011.60.4.899 |
| Keywords |
Ultra-violet rays ; Corona discharge ; Insulator ; Breakdown voltage |
| Abstract |
Inspections and diagnoses of corona discharge are important in order to prevent electrical faults of external insulation in power systems. This paper studies a measurement of ultra-violet rays(UV) strength of corona discharges on insulators using a UV sensor with an optic lens. The data has been compared with the images of a UV camera. The UV sensor estimated that DC voltage needed to be set at 700V for accurate data analysis of the properties of UV detected during corona discharge. UV was generated at 60kV when the corona discharge occurred. UV strength and images of UV increased at a high voltage. The image area of the UV using a UV camera and the detection of UV using a UV sensor have shown, that the polymer insulator mounted on a live part must be checked when the applied voltage on the good polymer insulator is greater than 37.5% of its breakdown voltage. |