| Title |
Operational Characteristics of Transformer-Type SFCL with or without Neutral Line between the Secondary windings and Superconducting units |
| Authors |
조용선(Cho, Yong-Sun) ; 최효상(Choi, Hyo-Sang) ; 고성필(Go, Sung-Pil) |
| DOI |
https://doi.org/10.5370/KIEE.2011.60.6.1268 |
| Keywords |
Transformer-type SFCL ; Neutral line ; Simultaneous quench |
| Abstract |
The study on power capacity increase of superconducting fault current limiter (SFCL) is one of the most important researches to apply a SFCL in the power system. To achieve this, we thought that the unbalanced quenching problem generated in series connection of superconducting units should be solved. In this paper, we investigated the quenching characteristics of superconducting units in the transformer-type SFCL with or without the neutral line between secondary windings and superconducting units. In case of transformer-type SFCL without neutral line, the connection structure of superconducting units is identical to that of the resistive-type SFCL connected in series. Therefore, the unbalanced quenching was occurred by difference of critical current between superconducting units. However, in case of transformer-type SFCL with neutral line, the superconducting units with different critical current were simultaneously quenched. It was because the currents induced by secondary winding were separately flowed through the superconducting units. By these results, we confirmed that the resistances and consumption powers of the superconducting units were equally generated. |