| Title |
Realization of Unified Protocol of Multi-functional Controller for Transfer of Vehicle Information on the Roads |
| Authors |
안승용(Ahn, Seung-Yong) ; 임성규(Lim, Sung-Kyu) ; 이승요(Lee, Seung-Yo) |
| DOI |
https://doi.org/10.5370/KIEE.2012.61.12.1857 |
| Keywords |
ITS(Intelligent Transport System) ; VDS(Vehicle Detection System) ; Communication protocol ; Radar vehicle detector ; Multi-functional controller |
| Abstract |
The VDS(Vehicle Detection System) collects and transfers information about traffic situations in real time, therefore it makes the traffic management effective. Recently, the VDSs have provided good stability and accuracy in regard to system reliability and functions but they also have showed problems such as raising costs and consuming times when a new system is installed and/or the environmental requirements for the system are set up. The reason of the problems is that up to now the collection of the data and information about the traffic situations has been achieved by the 1:1 information exchange between the traffic control surveillance center and the each traffic field, between equipments and centers, and among data processing equipments and also centers. The communication systems used in the VDS are generally composed of 1 : 1 connection of the lines because the communication protocols are different in the most of the cases mentioned above. Consequently, this makes the number of communication lines become larger and causes the cost for the whole traffic information systems to increase. In this paper, a development of a controller to unify the communication protocols for the VDS is peformed to solve the problems which were mentioned above. Specially, the controller developed in this paper was applied to a radar vehicle detector and tested to show its usefulness. In addition to that, the developed controller was also designed to include functions to transfer the information about weather conditions on the roads. |