| Title |
A Study on Rotor Eddy Current Loss and Thermal Analysis of PM Synchronous Generator for Wind Turbine |
| Authors |
최만수(Choi, Man Soo) ; 장영학(Chang, Young Hag) ; 박태식(Park, Tae Sik) ; 정문선(Jeong, Moon Seon) ; 문채주(Moon, Chae Joo) |
| DOI |
https://doi.org/10.5370/KIEE.2014.63.11.1575 |
| Keywords |
Ansoft Maxwell Program ; Eddy Current Loss ; Iron Loss ; PMSG ; Heat Transfer ; Convection ; Conduction ; Radiation ; Thermal Property ; Heat Transfer Coefficient |
| Abstract |
In this paper, eddy current loss, iron loss and heat transfer of PMSG with 2,000kW capacities were analyzed for wind turbine. The PMSG with 3 split magnet was analyzed using ansoft maxwell commercial program and, generator was tested by Back to Back converter with no load condition at laboratory. Rotor surface temperature was measured by Pt100 sensors for investigating heat transfer from rotor to atmosphere. The simulation results shows 27.4kW eddy current loss in no load condition and 50.2kW eddy current loss in rated load condition with 3 split magnet, and also shows 4.3kW iron loss in no load condition and 7.3kW iron loss rated load condition. The heat transfer coefficient of convection between rotor surface and atmosphere was investigated by 9.6W/m^2·K. Therefore the heat transfer from rotor to atmosphere was about 17kW(54%) and from rotor to air-gap was about 14.6kW(46%) in no load condition. It is identified that the cooling system for stator have to include the 46% of iron loss, and heat dissipation structure of rotor surface have to be suggested and designed for efficiency improvement of generator. |