P. Sethy, C. Pandey, Y. Sahu, and S. Behera, “Hyperspectral imagery applications for precision agriculture-a systemic survey,” Multimedia Tools and Applications, vol. 81, pp. 3005-3038, 2021.

Y. Jonghee, “Hyperspectral imaging for clinical applications,” BioChip Journal, vol. 16, pp. 1-12, 2022.

N. Neumann, M. Ebermann, S. Kurth, and K. Hiller, “Tunable infrared detector with integrated micromachined Fabry-Perot filter,” Journal of Micro/Nanolithography on MEMS and MOEMS, vol. 7, no. 2, pp. 1-12, 2008.

M. Tuohiniemi, M. Blomberg, A. Akujarvi, J. Antila, and H.saari, “Optical transmission performance of a surface-micromachined Fabry–Pérot interferometer for thermal infrared,” Journal of Micromechanics and Microengineering, vol. 22, pp. 115004, 2012.

C. Huber, P. Liu, C. Krammer, B. Stein, and H. Kalt, “MEMS Fabry–Pérot interferometers with double membrane mirrors for improved mirror parallelism,” Journal of Microelectromechanical Systems, vol. 27, no. 5, pp. 836- 843, 2018.

W. Wang, X. Gao, X. Fang, X. Li, H. Zhu, and Y. Wang, “Transmission properties of Fabry–Pérot filter consisting of silicon-based high-contrast gratings,” IEEE Photonics Journal, vol. 8, no. 1, pp. 1-14, 2016.

H. Hillmer, R. Brun, C. Woidt, A. Istock, A. Kobylinskiy, D. T. Nguyen, N. Ahmed, R. Brunner, and T. Kusserow, “Role of nanoimprint lithography for strongly miniaturized optical spectrometers,” Nanomaterials, vol. 11, no. 1, pp. 164, 2021.

A. Rissanen, M. Broas, J. Hokka, T. Mattila, J. Antila, M. Laamanen, and H. Saari, “Robustness and reliability of MOEMS for miniature spectrometers,” Reliability, Packaging, Testing, and Characterization of MOEMS/MEMS and Nanodevices XII, vol. 8614, pp. 1-7, 2013.

C. Calaza, L. Fonseca, M. Moreno, S. Marco, C. Cane, and I. Gracia, “A surface micromachining process for the development of a medium-infrared tuneable Fabry–Perot interferometer,” Sensors and Actuators A: Physical, vol. 113, no. 1, pp. 39-47, 2004.

M. Malak, A. Obaton, F. Marty, N. Pavy, S. Didelon, P. Basset, and T. Bourouina, “Analysis of micromachined Fabry- Perot cavities using phase-sensitive optical low coherence interferometry: insight on dimensional measurements of dielectric layers,” AIP Advances, vol. 2, no. 2, pp. 1-7, 2012.

H. Ahmad, N. A. Roslan, M. K. A. Zaini, and M. Z. Samion “Tunable multiwavelength erbium-doped fiber laser based on in-fiber Fabry-Perot interferometer fiber Bragg gratings in linear and ring cavity configurations,” Optik, vol. 262, pp. 1-12, 2022.

S. Cuk, and R. D. Middlebrook. “A new optimum topology switching DC-to-DC converter,” IEEE Power Electronics Specialists Conference, pp. 160-179, 1977.

N. Balke, T. Granzow, and J. Rödel. “Degradation of lead-zirconate-titanate ceramics under different dc loads,” Journal of Applied Physics, vol. 105, pp. 1-7, 2009.