D. Dev Singh, T. Mahender, A. Raji Reddy, “Powder bed fusion process: A brief review,” Materials Today: Proceedings, vol. 46, pp. 350-355, 2021.

K.-O. Lee, B. Lim, D.-J. Kim, M. Hong, and K. Lee, “Technology Trends in Additively Manufactured Small Rocket Engines for Launcher Applications,” Journal of the Korean Society of Propulsion Engineers, vol. 24, no. 2, pp. 73–82, 2020.

S. Chun Kit, “Towards supportless laser powder bed fusion: fundamental understanding of the formation of 1st layer overhang through parameter optimisation and in-situ high-speed thermal imaging,” Virtual and Physical Prototyping, vol. 18, pp. 23, 2023.

A. Chakraborty, R. Tangestani, R. Batmaz, W. Muhammad, P. Plamondon, A. Wessman, L. Yuan, É. Martin, “In-process failure analysis of thin-wall structures made by laser powder bed fusion additive manufacturing,” Journal of Materials Science & Technology, vol. 98, pp. 233-243, 2022.

W. Ziheng, N. Sneha Prabha, R. Anthony, “Exploring the fabrication limits of thin-wall structures in a laser powder bed fusion process,” Int J Adv Manuf Technol, vol. 110, pp. 191–207, 2020.

Y. Huihui, Y. Jingjing, H. Wenpu, W. Zemin, Z. Xiaoyan, “The printability, microstructure, crystallographic features and microhardness of selective laser melted Inconel 718 thin wall,” Materials & Design, vol. 156, pp. 407-418, 2018.

M. Khorasani, M. Leary, D. Downing, J. Rogers, A. Ghasemi, I. Gibson, S. Brudler, B. Rolfe, M. Brandt, S. Bateman, “Numerical and experimental investigations on manufacturability of Al–Si–10Mg thin wall structures made by LB-PBF,” Thin-Walled Structures, vol. 188, pp. 110814, 2023.

R. Chou, J. Milligan, M. Paliwal, “Additive Manufacturing of Al-12Si Alloy Via Pulsed Selective Laser Melting,” JOM, vol. 67, pp. 590–596, 2015.

K. Karami et.al, “Continuous and pulsed selective laser melting of Ti6Al4V lattice structures: Effect of post-processing on microstructural anisotropy and fatigue behaviour,” Additive Manufacturing, vol. 36, pp. 101433, 2020.

A. Demir, P. Colombo, B. Previtali, “From pulsed to continuous wave emission in SLM with contemporary fiber laser sources: effect of temporal and spatial pulse overlap in part quality,” The International Journal of Advanced Manufacturing Technology, vol. 91, pp. 2701-2714, 2017.

Y.F. Tzeng, “Process Characterisation of Pulsed Nd:YAG Laser Seam Welding,” The International Journal of Advanced Manufacturing Technology, vol. 16, pp. 10-18, 2000.

M. Sadowski, L. Ladani, W. Brindley, J. Romano, “Optimizing quality of additively manufactured Inconel 718 using powder bed laser melting process,” Additive Manufacturing, vol. 11, pp. 60-70, 2016.

C.A. Biffi, J. Fiocchi, P. Bassani, A. Tuissi, “Continuous wave vs pulsed wave laser emission in selective laser melting of AlSi10Mg parts with industrial optimized process parameters: Microstructure and mechanical behaviour,” Additive Manufacturing, vol. 24, pp. 639-646, 2018.

L. Simeng, X. Hui, L. Keyang, X. Wenjia, L. Yanqin, H. Xu, M. Jyoti, S. Lijun, “Melt-pool motion, temperature variation and dendritic morphology of Inconel 718 during pulsed- and continuous-wave laser additive manufacturing: A comparative study,” Materials & Design, vol. 119, pp. 351-360, 2017.

H. Xiao, S.M. Li, W.J. Xiao, Y.Q. Li, L.M. Cha, J. Mazumder, L.J. Song, “Effects of laser modes on Nb segregation and Laves phase formation during laser additive manufacturing of nickel-based superalloy,” Materials Letters, vol. 188, pp. 260-262, 2017.