Euroconsult. “Prospects for the Small Satellite Market,” 5th edn, 2019.

Katz-Demyanetz, Alexander, et al. “Powder-bed additive manufacturing for aerospace application: Techniques, metallic and metal/ceramic composite materials and trends,” Manufacturing review, vol. 6, pp. 5, 2019.

Hossain, Mohammad Shojib, et al. “Fabrication of smart parts using powder bed fusion additive manufacturing technology,” Additive Manufacturing, vol. 10, pp. 58-66, 2016.

Soller, Sebastian, et al. “Design and testing of liquid propellant injectors for additive manufacturing,” 7th European Conference for Aeronautics and Aerospace Sciences, EUCASS), Milano, Italy. 2017.

Ridgeway, Beth, “Successful NASA Rocket Fuel Pump Tests Pave Way for 3-D Printed Demonstrator Engine,” Nasa, AUG 26, 2015, <https://www.nasa.gov/technology/manufacturing- materials-3-d-printing/successful-nasa-rocket-fuel-pump-tests-pave-way-for-3-d-printed-demonstrator-engine/>

Lee, Keum-Oh, et al. “Technology trends in additively manufactured small rocket engines for launcher applications,” Journal of the Korean Society of Propulsion Engineers 24.2, pp. 73-82, 2020

Bartlett, Jamison L., and Xiaodong Li. “An overview of residual stresses in metal powder bed fusion,” Additive Manufacturing, vol. 27, pp. 131-149, 2019.

Liu, Yanbing, et al. “An optimized scanning strategy to mitigate excessive heat accumulation caused by short scanning lines in laser powder bed fusion process,” Additive Manufacturing, vol. 60, pp. 103256, 2022.

Charles, Amal, et al. “Down-facing surfaces in laser powder bed fusion of Ti6Al4V: Effect of dross formation on dimensional accuracy and surface texture,” Additive Manufacturing, vol. 46, pp. 102148, 2021.

Kumar, Amit, et al. “Microstructural and mechanical properties of an internal support-free IN625 closed impeller manufactured via laser powder bed fusion (L-PBF),” Materials Science and Engineering: A, vol. 874, pp. 145080, 2023.

Yuan, Zijun, and Xiangdong Chen, “Novel approach for fabricating horizontal overhanging structures in selective laser melting,” Journal of Manufacturing Processes, vol. 85, pp. 793-801, 2023.

Biedermann, Manuel, Patrick Beutler, and Mirko Meboldt. “Automated design of additive manufactured flow components with consideration of overhang constraint,” Additive Manufacturing, vol. 46, pp. 102119, 2021.