AHMED, Saadaldeen Rashid, et al., “Instant High Starting Current Protection System for Induction Motor Based Reducing the Starting Speed,” in International Conference on Forthcoming Networks, and Sustainability in the AIoT Era. Cham, Springer Nature Switzerland, pp. 286-294, 2024.

M. G. Solveson, B. Mirafzal, and N. A. O. Demerdash, "Soft-started induction motor modeling and heating issues for different starting profiles using a flux linkage ABC frame of reference," in IEEE Transactions on Industry Applications, vol. 42, no. 4, pp. 973-982, July-Aug. 2006.

R. F. McElveen, and M. K. Toney, "Starting high-inertia loads," in IEEE Transactions on Industry Applications, vol. 37, no. 1, pp. 137-144, Jan.-Feb. 2001.

PAREKH, Rakesh, “AC induction motor fundamentals,” Microchip Technology Inc, DS00887A, pp. 1-24, 2004.

Faizal, M., Kannayeram, G. & Mary, A.P, “A novel power quality improved AC voltage controller for soft starting of squirrel cage induction motors,” J. Power Electron. vol. 24, pp.1139–1149, 2024.

P. Amiri, and M. Akhbari, “Transient current limiter for suppressing transformer inrush, motor starting and fault currents in power system,” IET Electric Power Appl., vol. 11, no. 3, pp. 423–433, Mar. 2017.

N. S. Behzad, and M. Negnevitsky, “Soft and fast starting inductionmotors using controllable resistive type fault current limiter,” presented at the IEEE Power Energy Soc. General Meeting, Denver, CO, USA, pp. 1–5, 2015.

S. T. Lim, S. C. Ko, and S. H. Lim, “Analysis on current limiting characteristics of transformer type SFCL with additionally coupled circuit,” J. Electr. Eng. Techno., vol. 13, no. 2, pp. 533–539, 2018.

Park, Min Ki, and Lim, Sung Hun, “Fault Current Limiting and Magnetizing Characteristics of the Autotransformer Type SFCL,” Transactions on Electrical and Electronic Materials, vol. 18, no. 3, pp. 159–162, Jun. 2017.

T. H. Han, and S. H. Lim, “Analysis on magnetizing characteristics of current limiting reactor using HTSC module,” Progress in Superconductivity and Cryogenics, vol. 20, no. 1, pp. 15–18, Mar. 2018.