Mower, T. M., Long, M. J., “Mechanical behavior of additive manufactured, powder-bed laser-fused materials,” Mat. Sci. Eng, vol. 651, pp. 198-213, 2016.https://doi.org/10.1016/j.msea.2015.10.068

Herzog, D., Seyda, V., Wycisk, E., Emmelmann, C., “Additive manufacturing of metals,” Acta Mater., vol. 117, pp. 371-392, 2016.https://doi.org/10.1016/j.actamat.2016.07.019

W. J. Sames, F. A. List, S. Pannala, R. R. Dehoff and S. S. Babu, “The metallurgy and processing science of metal additive manufacturing,” Int. Mater. Rev, vol. 61, no. 5, pp. 315-360, 2016.https://doi.org/10.1080/09506608.2015.1116649

Alissultan Aliyev, Kwang-Kyu Lee and Dong-Gyu Ahn, “Effects of deposition strategies on thermo-mechanical characteristics of inconel 718 deposited region on AISI 1045 substrate with a cantilever structure by LENS process,” Journal of Mechanical Science and Technology, vol. 36, pp. 4695-4705, 2022.DOI:10.1007/s12206-022-0830-2

Seok-Chul Yun, Jae-Ho Shin, Jae-Woong Kim, Kyunsuk Choi, “A Study on Temperature Distribution Analysis for Supports to Minimize Heat Accumulation due to Changes in Cross-Sectional Area of 3D Model during the Additive Manufacturing,” The Korean Institute of Electrical Engineers Conference, pp. 33-33, 2023.DOI:10.5370/KIEE.2024.73.2.412

M. Bayat, C. G. Klingaa, S. Mohanty, D. De Baere, J. Thorborg, N. S. Tiedje and J.H. Hattel, “Part-scale thermo-mechanical modelling of distortions in Laser Powder Bed Fusion - Analysis of the sequential flash heating method with experimental validation,” Addit. Manuf, vol. 36, 101508, 2022.DOI:10.1016/j.addma.2020.101508

Cui, Chunjuan, et al., “Primary dendrite arm spacing and preferential orientations of the Ni–Si hypereutectic composites at different solidification rates,” Applied Physics A, vol. 126, 898, pp. 1-9, 2020.DOI:10.1007/s00339-020-04080-6

Jägle, Eric A., et al., “Precipitation reactions in age-hardenable alloys during laser additive manufacturing,” Jom, vol. 68, pp. 943-949, 2016.DOI:10.1007/s11837-015-1764-2

Ramakrishna, M., et al., “Effect of solutionizing temperature on the microstructural evolution during double aging of powder bed fusion-additive manufactured IN718 alloy,” Materials Characterization, vol 172, 110868, 2021.DOI:10.1016/j.matchar.2020.110868