KIEE
The Transactions of
the Korean Institute of Electrical Engineers
KIEE
Contact
Open Access
Monthly
ISSN : 1975-8359 (Print)
ISSN : 2287-4364 (Online)
http://www.tkiee.org/kiee
Mobile QR Code
The Transactions of the Korean Institute of Electrical Engineers
ISO Journal Title
Trans. Korean. Inst. Elect. Eng.
Main Menu
Main Menu
최근호
Current Issue
저널소개
About Journal
논문집
Journal Archive
편집위원회
Editorial Board
윤리강령
Ethics Code
논문투고안내
Instructions to Authors
연락처
Contact Info
논문투고·심사
Submission & Review
Journal Search
Home
Archive
2026-02
(Vol.75 No.2)
10.5370/KIEE.2026.75.2.362
Journal XML
XML
PDF
INFO
REF
References
1
Ilona Plesa, 2018, Polyethylene nanocomposites for power cable insulations, Polymers, Vol. 11, No. 1, pp. 24
2
X. Huang, J. Zhang, P. Jiang, 2018, Thermoplastic insulation materials for power cables: History and progress, High Volt. Eng., Vol. 44, No. 5, pp. 1377-1398
3
2006, Equipment failure modeling for underground distribution cables
4
2004, Research on improvement of insulation performance of underground distribution cables (Final Report)
5
S. M. Kim, J. B. Lee, 2010, Introduction to deterioration and diagnosis of underground cables
6
S. Nordas, 2010, The influence of strain on water treeing in XLPE power cables
7
C. N. Sanniyati, 2016, Water tree in polymeric cables: A review, Malays. J. Fundam. Appl. Sci., Vol. 12, No. 1, pp. 12-21
8
J. S. Shin, 2014, A study on the power loss cost of inner-grid in the offshore wind farm, J. KIIEE, Vol. 28, No. 3, pp. 72-77
9
L. Zou, 2025, Aging mechanisms and performance degradation of XLPE submarine cable insulation under marine major anion effects, Polymers, Vol. 17, No. 18, pp. 2450
10
D. He, 2020, Research on mechanical, physicochemical and electrical properties of XLPE-insulated cables under electrical-thermal aging, Int. J. Polym. Sci., Vol. 2020, pp. 3968737
11
H. Marcollo, 2025, Cable solutions for ocean energy: Latest design configurations, failure modes, and monitoring methods, Int. Mar. Energy J., Vol. 8, No. 3, pp. 331-342
12
J. Chen, 2023, Improvement on water tree resistance and electrical properties of XLPE by adopting triallyl isocyanurate, Polymer Testing, Vol. 123, pp. 108044
13
2018, HV AC submarine cable systems
14
F. Caslini, 2018, Performance evaluation and failure mode analysis of a long-term ageing test on HV submarine cables with tree-retardant XLPE insulation and factory joints
15
H. Zhang, 2017, Application status of XLPE insulated submarine cable used in offshore wind farm in China, J. Eng., Vol. 2017, No. 13, pp. 702-707
16
S. Nishikawa, 2022, Expansion of HVDC cable application in response to growing demand for renewable energy transmission, Sumitomo Electr. Tech. Rev., Vol. 94, pp. 33-39
17
G. Mazzanti, 2019, The insulation of HVDC extruded cable system joints. Part 1: Review of materials, design and testing procedures, IEEE Trans. Dielectr. Electr. Insul., Vol. 26, No. 3, pp. 964-972
18
2021, ASTM D257-21: Standard test methods for DC resistance or conductance of insulating materials
19
C. Ju, 2016, Electron material
20
2016, IEC 62631-3-1:2016: Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive (DC) properties - General method
21
2021, ASTM D257-14: Standard test methods for DC resistance or conductance of insulating materials
22
L. Nasrat, M. A. El-Akher, S. Qenawy, 2015, Electrical characteristics of XLPE cables containing different levels of calcium carbonate filler, Int. J. Sci. Res. Eng. Technol., Vol. 1, No. 5
23
2023, KS C IEC 60243-1: Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies
24
2020, Standard Test Method for Dielectric Breakdown of Solid Insulating Materials at Commercial Power Frequencies, ASTM D149-20
25
2013, Electric Strength of Insulating Materials - Test methods - Part 1: Tests at Power Frequencies, IEC 60243-1:2013
26
, Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials, ASTM D6097
27
, Electric cables - Test methods for non-metallic materials - Part 501: General test methods - Mechanical properties - Tensile strength and elongation test for cable elements, Method G11A, IEC 60811-501
28
B. Sabuncuoglu, 2013, Analysis of rate dependent tensile properties of polypropylene fibres used in thermally bonded nonwovens, J. Text. Inst., Vol. 104, No. 9, pp. 965-971
29
J. Ingram, 2008, Effect of strain rate on tensile behavior of polypropylene and carbon nanofiber filled polypropylene, Mater. Sci., Vol. 489, pp. 99-106