KIEE - The Transactions of the Korean Institute of Electrical Engineers

1

Ohnishi K., Shibata M., Murakami T., 1996, Motion control for advanced mechatronics, IEEE/ASME Transactions on Mechatronics, Vol. 1, No. 1, pp. 56-67

2

Yao B., Majed M. A., Tomizuka M., 1997, High- performance robust motion control of machine tools: an adaptive robust control approach and comparative experiments, IEEE/ASME Transactions on Mechatronics, Vol. 2, No. 2, pp. 63-76

3

Lee J., Chang P. H., Jin M., 2017, Adaptive integral sliding mode control with time-delay estimation for robot manipulators, IEEE Transactions on Industrial Electronics, Vol. 64, No. 8, pp. 6796-6804

4

Baek J., Cho S., Han S., 2017, Practical time-delay control with adaptive gains for trajectory tracking of robot manipulators, IEEE Transactions on Industrial Electronics, Vol. 65, No. 7, pp. 5682-5692

5

Bae Y. G., Jung S., 2018, Balancing control of a mobile manipulator with two-wheels by an acceleration-based disturbance observer, International Journal of Humanoid Robotics, Vol. 15, No. 3

6

Jeong S. H., Jung S., Tomizuka M., 2012, Attitude control of a quad-rotor system using an acceleration-based disturbance observer: An empirical approach, IEEE/ ASME International Conference on Advanced Intelligent Mechatronics, pp. 916-921

7

Quigley M., Brewer R., Soundararaj S. P., Pradeep V., Le Q., Ng A. Y., 2010, Low-cost accelerometers for robotic manipulator perception, IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 6168-6174

8

Roan P., Deshpande N., Wang Y., Pitzer B., 2010, Manipulator stae etimation with low cost accelerometers and gyroscopes, IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 4822-4827

9

Chen W., Tomizuka M., 2014, Direct joint space state estimation in robots with multiple elastic joints, IEEE/ASME Transactions on Mechatronics, Vol. 19, No. 2, pp. 697-706

10

Cantelli L., Muscato G., Nunnari M., Spina D., 2015, A joint-angle estimation method for industrial manipulators using inertial sensors, IEEE/ASME Transactions on Mechatronics, Vol. 20, No. 5, pp. 2486-2495

11

Shino M., Nagai M., 2003, Independent wheel torque control of small-scale electric vehicle for handling and stability improvement, JSAE Review, Vol. 24, No. 4, pp. 449-456

12

Osborn R. P., Shim T., 2006, Independent control of all- wheel-drive torque distribution, International Journal of Vehicle Mechanics and Mobility, Vol. 44, No. 7, pp. 529-546

13

Park J., Jeong H., Jang In. G., Hwang S. H., 2015, Torque distribution algorithm for an independently driven electric vehicle using a fuzzy control method, Energies, No. 8, pp. 8537-8561

14

He H., Peng J., Xiong R., Fan H., 2014, An Acceleration slip regulation strategy for four-wheel drive electric vehicles based on sliding mode control, Energies, Vol. 7, No. 8, pp. 3748-3763

15

Shuai Z., Zhang H., Wang J., Li J., Ouyang M., 2014, Combined AFS and DYC control of four-wheel- independent-drive electric vehicles over CAN network with time-varying delays, IEEE Transactions on Vehicular Technology, Vol. 63, No. 2, pp. 591-602

16

Tempel P., Herve P. El., Tempier O., Gouttefarde M., Pott A., 2017, Estimating inertial parameters of suspended cable-driven parallel robots-use case on CoGiRo, IEEE International Conference on Robotics and Automation, pp. 6093-6098

17

Atkeson C. G., An C. H., Hollerbach J. M., 1986, Estimation of inertia parameters of manipulator loads and links, The International Journal of Robotics Research, Vol. 5, No. 3, pp. 101-119

18

Lee S. D., Jung S., 2016, An experimental study on real time estimation of a nominal model for a disturbance observer: Recursive least square approach, Journal of Institute of Control, Robotics and Systems, Vol. 22, No. 8, pp. 650-655

19

Lee S. D., Jung S., September 20-23, 2016, An identification technique for non-minimum phase systems by a recursive least square method, Proceedings of the SICE Annual Conference 2016,Tsukuba, Japan, pp. 624-626

20

Lee S. D., Jung S., 2018, A state and disturbance observer design technique with a recursive least squares method: a second-order system for a CMG, Journal of Institute of Control, Robotics and Systems, Vol. 24, No. 5, pp. 438-444

21

Janabi-Sharifi F., Hayward V., Chen C. S. J., 2000, Discrete-time adaptive windowing for velocity estimation, IEEE Transactions on Control Systems Technology, Vol. 8, No. 6, pp. 1003-1009

KIEEThe Transactions of
the Korean Institute of Electrical Engineers

The Transactions of the Korean Institute of Electrical Engineers

ISO Journal TitleTrans. Korean. Inst. Elect. Eng.

Journal Search

Journal XML

References

KIEEThe Transactions ofthe Korean Institute of Electrical Engineers