G. M. Ter Haar and T. H. Becker, “Selective Laser Melting Produced Ti-6Al-4V: Post-Process Heat Treatments to Achieve Superior Tensile Properties,” Materials, vol. 11, (1), pp. 146, 2018.

Y. P. Dong et al, “Additive manufacturing of pure Ti with superior mechanical performance, low cost, and biocompatibility for potential replacement of Ti-6Al-4V,” Materials & Design, vol. 196, pp. 109142, 2020.

J. P. Kruth et al, “Selective laser melting of iron-based powder,” Journal of Materials Processing Technology, vol. 149, (1), pp. 616-622, 2004.

P. Li et al, “Critical assessment of the fatigue performance of additively manufactured Ti–6Al–4V and perspective for future research,” International Journal of Fatigue, vol. 85, pp. 130-143, 2016.

H. Yu et al, “Comparison on mechanical anisotropies of selective laser melted Ti-6Al-4V alloy and 304 stainless steel,” Materials Science & Engineering. A, Structural Materials : Properties, Microstructure and Processing, vol. 695, pp. 92-100, 2017.

N. Hrabe and T. Quinn, “Effects of processing on microstructure and mechanical properties of a titanium alloy (Ti–6Al–4V) fabricated using electron beam melting (EBM), Part 2: Energy input, orientation, and location,” Materials Science & Engineering. A, Structural Materials : Properties, Microstructure and Processing, vol. 573, pp. 271-277, 2013.

ASTM F3001-14 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion, 2021.

F. Sikan et al, “Thermo-Mechanical Modeling of Wire-Fed Electron Beam Additive Manufacturing,” Materials, vol. 14, (4), pp. 911, 2021.

A. Sharma, V. Rastogi and A. K. Agrawal, “Microstructural, Dynamic and Residual Stress Analysis of Metal Matrix Composite Shafts,” Transactions of the Indian Institute of Metals, vol. 73, (12), pp. 2995-3005, 2020.

Z. Q. Chen, Y. G. Li and M. H. Loretto, “Role of alloying elements in microstructures of beta titanium alloys with carbon additions,” Materials Science and Technology, vol. 19, (10), pp. 1391-1398, 2003.

G. Chen et al, “A comparative study of Ti-6Al-4V powders for additive manufacturing by gas atomization, plasma rotating electrode process and plasma atomization,” Powder Technology, vol. 333, pp. 38-46, 2018.

D. Wang et al, “Densification, Tailored Microstructure, and Mechanical Properties of Selective Laser Melted Ti-6Al-4V Alloy via Annealing Heat Treatment,” Micromachines (Basel), vol. 13, (2), pp. 331, 2022.

W. Rae and S. Rahimi, “Effect of stress relaxation on the evolution of residual stress during heat treatment of Ti-6Al-4V,” MATEC Web of Conferences, vol. 321, pp. 11001, 2020.

S. Gaiani et al, “Impact of Post-Process Heat Treatments Performed on Ti6Al4V Titanium Alloy Specimens Obtained Using LPBF Technology,” Technologies (Basel), vol. 11, (4), pp. 100, 2023.