• 대한전기학회
Mobile QR Code QR CODE : The Transactions of the Korean Institute of Electrical Engineers
  • COPE
  • kcse
  • 한국과학기술단체총연합회
  • 한국학술지인용색인
  • Scopus
  • crossref
  • orcid
The Transactions of the Korean Institute of Electrical Engineers

The Transactions of the Korean Institute of Electrical Engineers

ISO Journal TitleTrans. Korean. Inst. Elect. Eng.
SCImago Journal & Country Rank

Journal Search

  1. Home
  2. Archive
  3. 2025-10 (Vol.74 No.10)
  4. 10.5370/KIEE.2025.74.10.1747
XML PDF INFO REF

References

1 
A. K. Agrawal, “Active Phased Array Antenna Development for Modern Shipboard Radar Systems,” Johns Hopkins APL Technical Digest, vol. 22, no. 4, pp. 600-613, 2001. DOI:10.1109/ARRAY.2016.7832558DOI
2 
H. Oh, “AESA Radar Systems: Recent Developments, Economic Impact, and Future Prospects,” Journal of Consulting Convergence Research, vol. 4, no. 3, pp. 11-21, 2024. DOI:10.55479/JCCR.2024.4.3.011DOI
3 
K. Temir, “Consideration of environmental and functional factors in calibration of antenna integrated active phased array transmitters,” IEEE, pp 8-21, 2016. DOI:10.1016/j.energy.2020.119223DOI
4 
Z. He, “Thermal management and temperature uniformity enhancement of electronic devices by micro heat sinks: A review,” Energy, vol. 216, 119223, Feb. 2021. DOI:https://doi.org/10.1016/j.energy.2020.119223DOI
5 
M. Wang, “Effect of Temperature on Electromagnetic Performance of Active Phased Array Antenna,” Electronics, vol. 9, pp. 1211, 2020. DOI:https://doi.org/10.3390/electronics9081211DOI
6 
M. K. Chong, “Development of Planar Active Electronically Scanned Array(AESA) Radar Prototype for Airborne Fighter,” The Journal Of Korean Institute of Electromagnetic Engineering and Science, vol. 21, pp. 1380-1393, 2010. DOI:10.5515/KJKIEES.2010.21.12.1380DOI
7 
M. A. Habib, “Correlations of flow maldistribution parameters in an air cooled heat exchanger,” Numerical methods in fluids, vol. 56, pp. 143-165, 2008. DOI:https://doi.org/10.1002/fld.1518DOI
8 
K. Gocmen, “An intake manifold geometry for enhancement of pressure drop in a diesel engine,” Fuel, vol. 261, 2020. DOI:https://doi.org/10.1016/j.fuel.2019.116193DOI
9 
A. Jarrett, “Design optimization of electric vehicle battery cooling plates for thermal performance,” Journal of Power Sources, vol. 196, no. 23, pp. 10359-10368, 2011. DOI:https://doi.org/10.1016/j.jpowsour.2011.06.090DOI
10 
H. Jung, “Application of DfAM in Aerospace 3D Printing,” Journal of Aerospace System Engineering, vol. 17, no. 6, pp. 69, 2023. DOI:10.20370/kaser.2023.17.06.069DOI
11 
K. S. Prakash, “Additive Manufacturing Techniques in Manufacturing –An Overview,” Materials Today: Proceedings, vol. 5, pp. 3873-3882, 2018. DOI:https://doi.org/10.1016/j.matpr.2017.11.642DOI
12 
F. Razavirad, “Effects of Turbulence Modeling and Parcel Approach on Dispersed Two-Phase Swirling Flow,” Fuel, vol. 379, 2025. DOI:https://doi.org/10.1016/j.fuel.2024.133042DOI
13 
F. L. Cardoso-Ribeiro, “Port-Hamiltonian formulations for the modeling, simulation and control of fluids,” Computers and Fluids, vol. 283, 2024. DOI:https://doi.org/10.1016/j.compfluid.2024.106407DOI
14 
T. Gammaidoni, “CFD Analysis of an Electric Motor’s Cooling System: Model Validation and Solutions for Optimization,” Case Studies in Thermal Engineering, vol. 49, 2023. DOI:https://doi.org/10.1016/j.csite.2023.103349DOI
15 
D. Yue, “Tensile behavior of AlSi10Mg overhanging structures fabricated by laser powder bed fusion: Effects of support structures and build orientation,” Materials Science & Engineering A, vol. 880, 2023. DOI:https://doi.org/10.1016/j.compfluid.2024.106407DOI
16 
Y. Yao, “Numerical study on flow instability development of natural circulation in narrow channel under medium-to-high pressure,” Annals of Nuclear Energy, vol. 216, 2019. DOI:https://doi.org/10.1016/j.anucene.2025.111322DOI
17 
W. C. Strahle, “Pressure-velocity correlation in turbulent reacting flows,” Symposium (International) on Combustion, vol. 23, pp. 801-807, 1991. DOI:https://doi.org/10.1016/S0082-0784(06)80333-4DOI
18 
R. L. Webb, “Performance evaluation criteria for use of enhanced heat transfer surfaces in heat exchanger design,” Int. J. Heat Mass Transf, vol. 24, pp. 715-726, 1981. DOI:https://doi.org/10.1016/0017-9310(81)90015-6DOI
19 
E. Hosseinirad, “Effects of splitter shape on thermal-hydraulic characteristics of plate-pin-fin heat sink (PPFHS),” International Journal of Heat and Mass Transfer, vol. 143, 2019. DOI:https://doi.org/10.1016/j.ijheatmasstransfer.2019.118586DOI
20 
J. H. Lee, “A Study on the Optimization of Air-Cooled Flow Channels Shpae for Cooling of Antenna Array-Type High-Power Module,” Journal of the Korea Academia-Industrial cooperation Society, vol. 24, no. 8, pp. 598-606, 2023. DOI:https://doi.org/10.5762/KAIS.2023.24.8.598DOI