S. Zhu, D. Li, Y. Lei, "Disturbance mechanism of the solar array drive system on spacecraft," Mechanical Systems and Signal Processing, vol. 159, pp. 108306, 2021.

Y. Cao, D. Cao, J. Wei, W. Huang, "Modeling for solar array drive assembly system and compensating for the rotating speed fluctuation," Aerospace Science and Technology, vol. 84, pp. 131-142, 2019.

R. Li, F. Guo, C. Yu, Y. He, Z. Ye, S. Yuan, "Development and validation of a mechatronic solar array drive assembly for mini/micro-satellites," Acta Astronautica, vol. 134, pp. 54-64, 2017.

P. P. Acarnley, "Stepping Motors: A Guide to Theory and Practice," Institution of Engineering and Technology, pp. 1-50, 2002.

W. Kim, D. Shin, C. C. Chung, "Microstepping with nonlinear torque modulation for permanent-magnet stepper motors," IEEE Transactions on Control Systems Technology, vol. 21, no. 5, pp. 1971-1979, 2013.

M. Bodson, J. N. Chiasson, R. T. Novotnak, R. B. Rekowski, "High-performance nonlinear feedback control of a permanent magnet stepper motor," IEEE Transactions on Control Systems Technology, vol. 1, no. 1, pp. 5-14, 1993.

L. Wang, Y. Zhao, J. Liu, "A study on the detent torque and holding torque of a micro-claw pole stepper motor," Micromachines, vol. 13, no. 6, pp. 931, 2022.

Won-Jeong Choi, Sang-Hoon Kim, "Position Controller for Voice Coil Motors Using Nonlinear Friction Compensation," The Transactions of the Korean Institute of Electrical Engineers, vol. 74, no. 4, pp. 605-613, 2025.

Young Ik Son, Seungchul Lim, "A Comparison of IMP-based and DOB-based Controllers for a DC Motor Position Control System," The Transactions of the Korean Institute of Electrical Engineers, vol. 73, no. 2, pp. 343-348, 2024.

Gwan-Hui Jang, Gilsu Choi, Sehwan Kim, "Design and Analysis of an SPM Machine for EPS Applications to Reduce Torque Ripple," The Transactions of the Korean Institute of Electrical Engineers, vol. 73, no. 7, pp. 1155-1161, 2024.

Byung-Min Moon, Hyo-Seok Oh, Seung-Pyo Jeon, Yong-Eun Choi, Chin-Young Chang, Jae-Moon Kim, "A Study on BLDC Motors Position Control for Reliability Improvement of EMU Door," The Transactions of the Korean Institute of Electrical Engineers, vol. 73, no. 7, pp. 1246-1251, 2024.

T. Kenjo, A. Sugawara, "Stepping Motors and Their Microprocessor Controls," Oxford University Press, pp. 1-60, 1994.

S. M. Yang, E. L. Kuo, "Damping a hybrid stepping motor with estimated position and velocity," IEEE Transactions on Power Electronics, vol. 18, no. 3, pp. 880-887, 2003.